2008 Civic Si Transmission Fluid Capacity
When it comes to maintaining your 2008 Civic Si, one important aspect that often gets overlooked is the transmission fluid. Properly maintaining the transmission fluid is crucial for the smooth operation and longevity of your vehicle’s transmission. In this article, we will discuss the transmission fluid capacity for the 2008 Civic Si and provide you with all the information you need to keep your transmission running smoothly.
| Popular posts |
|---|
| What to do to prolong the life of your manual gearbox |
| Automatic transmission: what it is, how it works |
Transmission Fluid Capacity and Type
Before we dive into the details, let’s get straight to the point. The transmission fluid capacity for the 2008 Civic Si is approximately 2.9 quarts or 2.7 liters. This is the amount of fluid required for a complete fluid change, including draining the old fluid and refilling with fresh fluid.
Now that you know the capacity, let’s talk about the type of transmission fluid you should use. Honda recommends using their Genuine Honda Manual Transmission Fluid (MTF). This fluid is specifically formulated to meet the requirements of your Civic Si’s transmission and provide optimal performance and protection.
| Transmission Fluid Type | Capacity (Quarts) | Capacity (Liters) |
|---|---|---|
| Genuine Honda Manual Transmission Fluid (MTF) | 2.9 | 2.7 |
How to Check and Fill Transmission Fluid
Checking and filling the transmission fluid in your 2008 Civic Si is a relatively simple process. Here’s a step-by-step guide to help you get the job done:
- Make sure your vehicle is on a level surface and the engine is turned off.
- Locate the transmission fluid dipstick, which is usually labeled and located near the engine bay.
- Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
- Reinsert the dipstick fully into the transmission and then remove it again.
- Check the fluid level on the dipstick. The fluid should be between the “MIN” and “MAX” marks. If it’s below the “MIN” mark, you’ll need to add more fluid.
- If you need to add fluid, use a funnel to pour the Genuine Honda Manual Transmission Fluid (MTF) into the transmission through the dipstick tube. Be sure to add small amounts at a time and recheck the fluid level frequently to avoid overfilling.
- Once the fluid level is within the proper range, securely reinsert the dipstick and you’re done!
Remember, it’s important to follow the manufacturer’s recommendations and use the correct type and amount of transmission fluid. Neglecting to do so can lead to transmission problems and costly repairs down the road.
Conclusion
Now that you know the transmission fluid capacity for your 2008 Civic Si and how to properly check and fill the fluid, you can ensure the smooth operation and longevity of your vehicle’s transmission. Remember to use Genuine Honda Manual Transmission Fluid (MTF) and follow the recommended maintenance schedule for optimal performance. Taking care of your transmission will pay off in the long run, keeping you on the road and avoiding unnecessary headaches.
Author
What Color Should Transmission Fluid Be?
