2012 Buick Lacrosse Transmission Fluid Capacity: A Guide to Proper Maintenance

2012 Buick Lacrosse Transmission Fluid Capacity

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Introduction

If you’re a proud owner of a 2012 Buick Lacrosse, it’s important to keep your vehicle’s transmission running smoothly. One crucial aspect of transmission maintenance is ensuring that the transmission fluid is at the correct level. In this article, we will discuss the transmission fluid capacity for the 2012 Buick Lacrosse, so you can keep your vehicle in top shape.

Transmission Fluid Capacity and Type

To determine the transmission fluid capacity for your 2012 Buick Lacrosse, refer to the table below:

Transmission Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
6-Speed Automatic 11.9 11.2

Steps to Check and Add Transmission Fluid

If you suspect that your transmission fluid is low, here are the steps to check and add fluid to your 2012 Buick Lacrosse:

  1. Park your vehicle on a level surface and engage the parking brake.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the back of the engine compartment.
  3. With the engine warmed up and running, remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
  5. If the fluid level is below the recommended range, you will need to add transmission fluid. Use a funnel to pour the fluid into the transmission through the dipstick tube. Be careful not to overfill.
  6. Recheck the fluid level using the dipstick and add more fluid if necessary.
  7. Once the fluid level is within the recommended range, securely reinsert the dipstick.
  2011 Buick Enclave Transmission Fluid Capacity: A Crucial Maintenance Aspect

Conclusion

Maintaining the proper transmission fluid level in your 2012 Buick Lacrosse is essential for optimal performance and longevity. By following the steps outlined in this article and referring to the provided transmission fluid capacity table, you can ensure that your vehicle’s transmission remains in top condition. Remember, it’s always better to be proactive in maintaining your vehicle than to deal with costly repairs down the road.

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top