2012 F350 Transmission Fluid Capacity
| Popular posts |
|---|
| What to do to prolong the life of your manual gearbox |
| Automatic transmission: what it is, how it works |
Introduction
If you own a 2012 F350 and are wondering about the transmission fluid capacity, you’ve come to the right place. In this article, we will provide you with the blunt and straightforward information you need, without any sugarcoating. So, let’s dive right in!
Transmission Fluid Capacity and Type
To ensure optimal performance and longevity of your 2012 F350’s transmission, it is crucial to use the correct amount and type of transmission fluid. Here is a table that outlines the transmission fluid capacity in both quarts and liters:
| Transmission Fluid Capacity | Quarts | Liters |
|---|---|---|
| 6R140 TorqShift | 17.5 | 16.6 |
Steps to Check and Add Transmission Fluid
If you need to check or add transmission fluid to your 2012 F350, follow these steps:
- Park your vehicle on a level surface and engage the parking brake.
- Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay.
- With the engine warmed up and running, pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
- Reinsert the dipstick fully and then pull it out again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
- If the fluid level is below the recommended range, you will need to add transmission fluid. Use a funnel to pour the fluid into the dipstick tube, being careful not to overfill.
- After adding fluid, recheck the level using the dipstick and add more if necessary.
- Once the fluid level is within the recommended range, securely reinsert the dipstick.
Safety Precautions
While checking and adding transmission fluid is a relatively simple task, it is important to prioritize safety. Here are a few crucial safety precautions to keep in mind:
- Always park your vehicle on a level surface and engage the parking brake to prevent any accidental movement.
- Ensure the engine is warmed up and running when checking the fluid level to get an accurate reading.
- Be cautious when working around hot engine components to avoid burns or injuries.
- Use a lint-free cloth or paper towel to avoid introducing any contaminants into the transmission.
- Only use the recommended type of transmission fluid specified in your vehicle’s owner’s manual.
Conclusion
Knowing the transmission fluid capacity of your 2012 F350 is essential for maintaining its performance and longevity. By following the steps outlined in this article and prioritizing safety, you can confidently check and add transmission fluid as needed. Remember to always refer to your vehicle’s owner’s manual for specific instructions and consult a professional if you are unsure or uncomfortable performing these tasks yourself.
Author
What Color Should Transmission Fluid Be?
