2012 Ford Fiesta Transmission Fluid Capacity: A Guide for Proper Maintenance

2012 Ford Fiesta Transmission Fluid Capacity

Introduction

If you own a 2012 Ford Fiesta and are wondering about its transmission fluid capacity, you’ve come to the right place. In this article, we will provide you with all the necessary information you need to know about the transmission fluid capacity for your vehicle. So, let’s dive right in!

Transmission Fluid Capacity and Type

To ensure the smooth operation of your Ford Fiesta’s transmission, it is crucial to use the correct amount and type of transmission fluid. Here is a table that outlines the transmission fluid capacity in both quarts and liters for the 2012 Ford Fiesta:

Transmission Fluid Capacity Quarts Liters
Automatic Transmission 6.0 quarts 5.7 liters
Manual Transmission 2.0 quarts 1.9 liters

Transmission Fluid Replacement

If you need to replace the transmission fluid in your 2012 Ford Fiesta, here are the steps you should follow:

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the back of the engine compartment.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
  5. If the fluid level is low, you will need to add the appropriate amount of transmission fluid. Refer to the table above for the correct capacity.
  6. Using a funnel, carefully pour the transmission fluid into the dipstick tube. Take your time to avoid spills.
  7. After adding the fluid, recheck the level using the dipstick. Make sure it falls within the recommended range.
  8. Replace the dipstick securely and close the hood of your vehicle.
  2001 F250 Transmission Fluid Capacity: Blunt and Straightforward Guide

Conclusion

Knowing the transmission fluid capacity for your 2012 Ford Fiesta is essential for maintaining the longevity and performance of your vehicle’s transmission. By following the table provided and the steps for fluid replacement, you can ensure that your transmission operates smoothly and efficiently. Remember, it’s always better to be proactive when it comes to vehicle maintenance, so don’t neglect your transmission fluid!

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top