2017 Jeep Wrangler Transmission Fluid Capacity: A Guide to Proper Maintenance

2017 Jeep Wrangler Transmission Fluid Capacity

Introduction

The transmission fluid in your 2017 Jeep Wrangler is vital for smooth gear shifting and overall performance. It is essential to know the correct transmission fluid capacity to ensure proper maintenance and avoid potential issues. In this article, we will provide you with the necessary information on the transmission fluid capacity for your Jeep Wrangler.

Transmission Fluid Capacity and Type

To determine the transmission fluid capacity for your 2017 Jeep Wrangler, refer to the table below:

Transmission Fluid Capacity (Quarts) Fluid Capacity (Liters)
Manual Transmission (NSG370) 2.1 Quarts 2.0 Liters
Automatic Transmission (32RH) 4.0 Quarts 3.8 Liters
Automatic Transmission (42RLE) 4.0 Quarts 3.8 Liters
  2007 Jeep Compass Transmission Fluid Capacity: A Guide for Smooth Gear Shifts

Transmission Fluid Replacement

If you need to replace the transmission fluid in your 2017 Jeep Wrangler, follow these steps:

  1. Ensure your vehicle is on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, which is typically labeled and located near the engine bay.
  3. Using a clean cloth or paper towel, remove the dipstick and wipe it clean.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level.
  5. If the fluid level is below the recommended range, you will need to add the appropriate amount of transmission fluid.
  6. Using a funnel, slowly pour the transmission fluid into the dipstick tube. Be cautious not to overfill.
  7. Recheck the fluid level using the dipstick and add more fluid if necessary.
  8. Once the fluid level is within the recommended range, securely reinsert the dipstick.
  2018 Jeep Compass Transmission Fluid Capacity: A Guide for Proper Maintenance

Conclusion

Knowing the correct transmission fluid capacity for your 2017 Jeep Wrangler is crucial for maintaining optimal performance. Refer to the table provided to ensure you use the appropriate amount of fluid during transmission fluid replacement. By following the steps outlined, you can confidently perform this maintenance task and keep your Jeep Wrangler running smoothly on and off the road.

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top