2018 Jeep Compass Transmission Fluid Capacity: A Guide for Proper Maintenance

2018 Jeep Compass Transmission Fluid Capacity

Introduction

When it comes to maintaining your 2018 Jeep Compass, one crucial aspect is ensuring that the transmission fluid is at the right level. In this article, we will discuss the transmission fluid capacity for the 2018 Jeep Compass and provide you with the necessary information to keep your vehicle running smoothly.

Transmission Fluid Capacity and Type

To determine the transmission fluid capacity for your 2018 Jeep Compass, refer to the table below:

How to Check and Add Transmission Fluid

• Make sure your vehicle is parked on a level surface and the engine is turned off.
• Locate the transmission fluid dipstick, which is usually labeled and located near the engine.
• Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
• Reinsert the dipstick fully and then remove it again to check the fluid level.
• The dipstick will have markings indicating the minimum and maximum fluid levels. Ensure that the fluid level is within this range.
• If the fluid level is low, you can add the appropriate transmission fluid using a funnel. Refer to the table above for the correct fluid type and capacity.
• After adding fluid, recheck the level to ensure it is within the recommended range.
• Replace the dipstick securely once you have finished checking or adding fluid.

Conclusion

Maintaining the proper transmission fluid level in your 2018 Jeep Compass is essential for the longevity and performance of your vehicle. By following the guidelines provided in this article, you can ensure that your transmission operates smoothly and efficiently. Remember to always refer to the owner’s manual for specific instructions and safety precautions.

What Color Should Transmission Fluid Be?